clutch mechanism
英 [klʌtʃ ˈmekənɪzəm]
美 [klʌtʃ ˈmekənɪzəm]
网络 离合机构; 离合器机构; 离合器; 离合器机制
双语例句
- Research Progress of Inchworm Actuator with Clutch Clamping Mechanism
离合器箝位型尺蠖驱动器研究及发展 - Clutch release master cylinder You can operate the mechanism by winding this handle.
离合器操纵机构主缸你可转动此手柄操作机器。 - Calculation of overrunning clutch in a large tyre crane hoisting mechanism is conducted.
在此基础上，以某大型轮胎起重机起升机构的超越离合器为例，进行扭转刚度的分析。 - The electromagnetic clutch plays a part in energy conservation, noise reduction and environment protection for the bus, truck and engineering mechanism.
简述电磁离合器在客车及重卡、工程机械中起到的节能、降噪、环保作用。 - A hydraulic clutch and self-adjusting mechanism eliminates the need for adjustments throughout the lifespan of the transmission.
阿液压离合器和自动调节的机制消除了调整，在整个传输寿命的需要。 - This combination is used as overrunning clutch and extensive used in mechanism of packing, metallurgy, mine and so on.
广泛的应用在矿山，冶金，水泥等行业的机械设备上。 - Main causes of throwing turret are: friction torque of friction clutch of turret traversing mechanism is not enough, and worm gear and worm of traversing mechanism are not self-locking.
甩炮塔的主要原因是：炮塔方向机的摩擦离合器摩擦力矩不够，方向机的蜗轮蜗杆不自锁。 - Adjustment of the Lipe Clutch Actuating Mechanism
Lipe离合器操纵机构的调整 - The existing driving types and construction of High Energy Clutch Operated Screw Press'return mechanism are analyzed and compared.
分析、对比了高能螺旋压力机现有的回程机构动力传递方式、结构形式。 - A Study on Method of Identification of Transient Torque of Clutch Transfer Mechanism
离合传动系统瞬态啮合扭矩模态识别方法初探 - Application of the Spiral Clutch Breaking Mechanism in Winch A Design for Spiral Wound Clutch Facing
螺旋离合制动机构在卷扬机上的应用用数学建模方法进行离合器片缠绕工艺的设计 - Design of a Piezoelectric Motor with Clutch Coupling Mechanism
一种采用离合器耦合驱动的压电电机的设计 - Structure and Mechanics Analysis of Automatic Clutch Mechanism
自动离合机构的结构及力学分析 - The clutch operation mechanism driven by DC servo motor was designed and its mathematic model was built. This mechanism was controlled by a dual closed loop controller ( fuzzy logic control and PI control).
设计了基于模糊控制和PI控制双闭环控制的伺服电机驱动离合器执行机构，建立了数学模型，并进行了系统仿真。 - The method of torque capacity calculation and the principle of model selection for electro-magnetic clutch applied in hoist mechanism of tower crane are introduced in this article.
本文介绍了电磁离合器应用于塔式起重机起升机构的扭矩容量计算方法和型号选择原则。 - Calculation of torsion stiffness in overrunning clutch of hoisting mechanism
起升机构超越离合器扭转刚度计算方法 - Overrunning clutch as output mechanism of pulse-type stepless transmission is friction roller-type mainly. Because roller and output shaft contact with a higher pair, surface of output shaft appears groove mark obviously when repeated driving.
脉动无级变速器的输出机构&超越离合器，目前主要是摩擦滚柱式超越离合器，由于滚柱与输出轴之间以高副接触，往复驱动下输出轴表面明显出现沟痕。 - The Working Principle and the Mathematics Model of Differential and Double Brake-block Overrunning Speed Clutch Based on Automatic Adjusting THE EVOLUTION OF DIFFERENTIAL OVERRUNNING SPEED CLUTCH AND ITS THE COMPANY COUPLER MECHANISM
基于自调的差动双制动块式超越离合器工作机理与数学模型 - Overrunning Speed Clutch is one of the key pats in impulse Stepless Speed Regulators, and working capability depends on the control factor of its mechanism efficiency, twist moment and life-span.
超越离合器系脉动无级变速器的关键部件，其工作能力决定了整机效率的高低、输出扭矩的大小和耐用寿命的长短。 - The strategy controls the rotation speed difference between engine and the clutch drive mechanism distance increment. It makes it possible to satisfy the requirement of controlling smoothly and fast.
该策略根据油门开度和发动机转速与离合器输出轴转速差，并通过控制离合器驱动机构的行程增量，满足驾驶员平稳、快捷的要求，同时具有所需输入信号少的特点。 - The usage of this kind of clutch is explained with the example of the manpower tricycles driving mechanism.
文中以人力三轮车驱动机构为例说明了这种离合器的用途。 - Slip-pin safety clutch is a safety mechanism. It has been used widely in agricultural machinery.
滑销安全离合器是广泛使用在农业机械中的一种安全装置。 - Steering clutch is one of the important parts in steering mechanism of crawler dozer, its manually designing and drawing are very complicate procedures.
履带式推土机的转向离合器是其转向机构的主要组成部件之一，其手工设计、绘图是一个复杂的过程。 - The article describes the structure feature and design principle of the mechanical automatic clutch mechanism used in motorcycle starting, and establishes the math modeling for dynamics and kinematics, which gives solutions to the problems with the design and the analysis of the clutch mechanism.
阐述了一种摩托车电起动中采用的机械式自动离合机构的结构特点和设计原理并建立了动力学和运动学数学模型，为解决该机构的设计及分析该机构存在的问题提供参考。 - The parts of rigid body model are replaced by corresponding flexibility body. The torsional vibration model of driveline, which includes flywheel of engine, clutch, transmission, universal joint, drive shaft, main reducing gear-differential mechanism, half axle and road wheel, is established.
用柔性部件替代刚体模型中的对应部件，建立一个包括发动机飞轮、离合器、变速器、万向节、传动轴、后驱动桥、半轴以及车轮在内的传动系扭振模型。 - In many industry applications, gearboxes, clutch and other mechanical transmission mechanism are used in drive electrical transmission systems. However the presence of the mechanical transmission mechanism reduces the reliability and efficiency of the system.
在很多工业应用领域，电气传动系统需要包含齿轮箱、离合器等机械变速机构，但是齿轮箱等机械装置的引入降低了系统的可靠性，增加了额外的损耗，降低了系统的效率。 - By induction summary, we conclude that seven clutch word bathe first analysis of the law: the same as their word, words of motivation are the same, the same as the word of the mechanism.
通过归纳法对洗澡等七个离合词先分析后总结，我们得出这样一个结论：他们的词化过程相同，词化的动因相同，词化的机制相同。